Vodacom 3G with Huawei Mobile Connect E172 in South Africa
Friday, November 21st, 2008This morning I stopped into the Vodacom store in Cresta Shopping Center, where I picked up a Huawei Mobile Connect E172 USB adapter for around R2,400 (roughly USD $240) without a contract. I purchased a SIM card for another R12, and signed up for a 5GB/mo data bundle for R980.
First impression: If this is 3G, then 3G just isn’t that impressive. Right from the shopping center, my speed tests were showing 82 ms pings (nice!) but only 1,075 kb/s down and 324 kb/s up. It’s very usable, but nowhere close to the “7.2 mbit/s” sales pitch of 3G. Still, the low latency makes it suitable for VoIP calling which is great.
What does impress me is the fact that right now I am sitting in Pilanesburg at Kwa Maritane and I’m able to get a GPRS connection, 539 ms ping with 47 kb/s down and 28 kb/s up. I’m practically “in the middle of nowhere” and I can still get GPRS. Back in America, this would almost certainly be a dead spot with no reception at all.
I’ll be here for the week, trying to survive on this slow connection–it’s okay for pushing and pulling emails without attachments and simpler web pages, but it’s going to make doing most of my work really challenging. I might have to pop down to Sun City to see if I can get better speeds to work with.
Tags: Vodacom, 3G, mobile, Huawei, Pilanesburg, South Africa









March 12th, 2010 at 10:30 pm
Mikki: I would hazard a guess that any reasonably experienced technician should do an adequate job. Obviously, every individual ...
March 12th, 2010 at 9:52 pm
Okay...now you have me worried...I've had my WONDERFUL Bosch washer/condensation dryer for about 8 years without a problem (okay so ...
March 11th, 2010 at 8:45 am
I'm not sure, but I'm guessing it's the belt that turns the drum - may be too tight, may be ...
March 11th, 2010 at 6:57 am
Hello all. I now have a different problem. The drum groans as it spins. When you try ...
March 10th, 2010 at 9:35 pm
Hi Dossy, Thanks much for sharing the knowledge with others. This article helps me to avoid DISM errors : ...