I needed to re-enable service updates on my SA2 TiVo tonight and I’d forgotten how to toggle it after having disabled them when I first hacked my TiVo, and had a tough time finding the information so I figure I’ll post it to my blog so I’ll be able to find it again.
The key command is bootpage – use “bootpage -p /dev/hda” to see the current settings. Then, use “bootpage -P "..." /dev/hda” to change them. Specifically, change “upgradesoftware=false” to “upgradesoftware=true” or vice versa.
![[RSS]](http://dossy.org/wp/wp-content/themes/dossyblog-11/art/feed-icon-16x16.png){kind=icon}
March 12th, 2010 at 10:30 pm
Mikki: I would hazard a guess that any reasonably experienced technician should do an adequate job. Obviously, every individual ...
March 12th, 2010 at 9:52 pm
Okay...now you have me worried...I've had my WONDERFUL Bosch washer/condensation dryer for about 8 years without a problem (okay so ...
March 11th, 2010 at 8:45 am
I'm not sure, but I'm guessing it's the belt that turns the drum - may be too tight, may be ...
March 11th, 2010 at 6:57 am
Hello all. I now have a different problem. The drum groans as it spins. When you try ...
March 10th, 2010 at 9:35 pm
Hi Dossy, Thanks much for sharing the knowledge with others. This article helps me to avoid DISM errors : ...